In What Means Does A Crusher's Wear Component's Lifespan Differ?

Press release: 06 September, 2021: Many users of the crusher plant will have questions about the best material to use and the length of time it can last. They will be interested in knowing the differences between Mn18 and Mn13 and if Mn18 is superior to M13.

There are many casting workers have conducted a thorough study and shared their experience regarding the elements that affect the shredder wear parts duration of. The crusher component mentioned here is just all about casting wear parts such as manganese and chrome casting components. casting parts such as roll mill liner, cone liner, jaw plate, and so on.

What effect will material selection have on the crusher's wear parts' life?

Manganese steel is the material used in all crusher parts, with the exception for the blowbar. This is due to the fact that the blowbar material contains a lot of manganese. There are three trademarks that can be found in manganese steel. They are Mn22, Mn18 and Mn14. If the steel with high manganese is subjected to a very impact or the crushing stress, then its surface will get hard extremely quickly. At the same time, the inside of it will retain excellent toughness. This means that when the surface begins to harden with more adequate then it will be very good for wearing.

High manganese steel will have the lowest hardness, which is HB 170 to 230 so that if there is a high limit to the wear that is not cured, the surface will not be sufficiently hardened where the wearable won't be able to guarantee. And now you have the dilemma of which material is the best choice based on the products that you crushed. The manganese casting foundry will use manganese which has been abandoned. For those who require more than 18 percent electrolysis manganese could be the most cost-effective and efficient option.

The basic thing is that you must select the most suitable material for making the final product, because without the best material the product you end up with will not be of the highest quality and will last a long time. seek advice from experts prior to going to buy any crusher wear parts.

What type of treatment has an an impact on crusher wear part's life?

Heat treatment is one of the most important steps in casting. It has a direct impact on the quality of the product. Before you begin the heating process the surface of the casting should be extremely clear and it should be controlled of the time that passes between the furnace and the water pool along with that there should be an increase in the amount of carbon on the surface of the product and also, there is a need for paying attention to the temperature of the water pool where the standard of the European for the water pool temperature should not exceed 20 degrees Celsius.

What will printing and machining have its effect on the crusher wear parts span life?

After the heat treatment, the castings will go to the shop to be machinized. The shop will alter the size of the casting and ensure it is suitable for the plant that crushes it. And as the last step to ensure that the casting is an appropriate and correct size will undergo printing which is not least step. This painting process not only makes the castings beautiful and also the process protects castings from the oxidation process.

The printing process makes castings appear beautiful. Many people prefer castings with high-end quality and appealing. The expert prints the castings to enhance their appeal. Additionally, the machining is what makes them the right size. The castings that are the proper size, with excellent and awesome printing are sure to be a huge success with crusher plant users, new traders, and regular traders.

Contact info:

Qiming Casting

Address

2th,Taixi Road, Pukou Area, Nanjing City, China

Phone: [phone]

Website: https://www.qimingcasting.com/